IEI Door Gard Keypad Manual: A Comprehensive Guide

The IEI Door Gard Keypad is an innovative solution for securing doors and gates with ease. In this article, we will walk you through the process of setting up your IEI Door Gard Keypad manually, ensuring a smooth and secure installation.

Pre-Installation Preparation

Before starting the installation, it's essential to familiarize yourself with the components included in the package. Take inventory of the following items:

1. 212 Standalone Mullion Instruction Manual

2. Hardware Pack containing:

* 2 x 8 x 1¼” Panhead Slotted Machine Screw

* 2 x 8 x 1¼” Round Head Wood Screw

* 6-8 x ¾” Plastic Anchor

3. 212iLM mounting template

4. Keypad: 212iLM Mullion keypad

5. Harnesses: 1 x 8 Conductor wire harness

6. Wrenches: 1 x Standard 5/64 allen wrench

Step-by-Step Installation Guide

Follow these steps to install your IEI Door Gard Keypad:

1. Attach Relay Wires: Connect the relay wires (white/yellow, blue, and brown) to the wire run connected to the locking device.

2. Surface Mounting: Mount the 212iLM Mullion surface-mounted with a 1/4” hole for the wires centered approximately 5/8 of an inch underneath the center of bottom mounting hole (refer to the included mounting template).

3. Power Supply: Although the 212iLM will work with AC or DC voltage, it is recommended to use a filtered and regulated power supply for its ability to maintain voltage and reduce the possibility of voltage spikes.

4. Mounting Height: The mounting height is the same as an electrical switch, 48' on center.

5. Drilling and Anchoring: Use drill bits (1/8, 3/16 & 5/16) for the plastic anchors.

6. Wire Stripping: Strip the wires using wire strippers.

7. Tool Requirements: You will need a marking pen or pencil, silicone to seal any holes, electrical tape to hold the wires together or template in place, and a drill.

IEI Door Gard Keypad Dimensions

The 212iLM Mullion keypad has the following dimensions:

* Length: 6 ½”

* Width: 1 ¾”

* Depth: 1 1/8”

By following these steps and ensuring you have all the necessary components, you can successfully install your IEI Door Gard Keypad. Remember to check the packing list to verify that all parts are present before starting the installation process.

References

* 212 Standalone Mullion Instruction Manual

* Hardware Pack contents

Please note that this article is based on the provided text and may not cover all aspects of the IEI Door Gard Keypad manual. For more information, please refer to the official instruction manual or contact the manufacturer's support team if you encounter any issues during installation.

Iei door gard keypad manual